DroboPorts
Cross-compiling and ready-to-use applications for the DroboFS and Drobo5N
Cross-compiling and ready-to-use applications for the DroboFS and Drobo5N
Computer backup made simple.
This DroboApps depends on the locale and java8 DroboApps. If you do not have firmware 3.3.0, please make sure they are installed or Crashplan will not start.
Please check the configuration page of CrashPlan in Drobo Dashboard for detailed instructions on how to redirect the CrashPlan client to connect with the Drobo.
Size: 36 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
Please check the configuration page of CrashPlan in Drobo Dashboard for detailed instructions on how to redirect the CrashPlan client to connect with the Drobo.
Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
Don’t forget to secure access to your Crashplan installation by enabling password access in “Settings” > “Security” > “Require account password to access CrashPlan desktop application”
Size: 25 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, follow these steps:
/Applications/CrashPlan.app/Contents/Resources/Java/conf/ui.properties on OSXC:\Program Files\CrashPlan\conf\ui.properties on Windows/usr/local/crashplan/conf/ui.properties on LinuxserviceHost=xxx.xxx.xxx.xxx, replacing xxx.xxx.xxx.xxx with the ip address of the Drobo, and save the file./Library/Application Support/CrashPlan/.ui_info on OSXC:\ProgramData\CrashPlan\.ui_info on Windows$HOME/.crashplan/.ui_info on Linux4243,drobo. You can preserve the original .ui_info file somewhere else, and restore it once you are done accessing CrashPlan on the Drobo.Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
Don’t forget to secure access to your Crashplan installation by enabling password access in “Settings” > “Security” > “Require account password to access CrashPlan desktop application”
Size: 25 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, follow these steps:
~/Library/Application Support/CrashPlan/ui.properties on OSXC:\Program Files\CrashPlan\conf\ui.properties on Windows/usr/local/crashplan/conf/ui.properties on LinuxserviceHost=xxx.xxx.xxx.xxx, replacing xxx.xxx.xxx.xxx with the ip address of the Drobo.Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
Don’t forget to secure access to your Crashplan installation by enabling password access in “Settings” > “Security” > “Require account password to access CrashPlan desktop application”
Size: 23 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start..
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4200:localhost:4243 root@drobo-5n
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4200
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 23 MB
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-5n
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 21 MB
Changelog: This version fixes several problems with service.sh, and reduces the maximum memory assigned to CrashPlan.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-5n
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 20 MB
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-5n
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 20 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
Please check the configuration page of CrashPlan at http://drobo.ip.address.here:8080/crashplan/ for detailed instructions on how to redirect the CrashPlan client to connect with the Drobo.
Size: 36 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, follow these steps:
/Applications/CrashPlan.app/Contents/Resources/Java/conf/ui.properties on OSXC:\Program Files\CrashPlan\conf\ui.properties on Windows/usr/local/crashplan/conf/ui.properties on LinuxserviceHost=xxx.xxx.xxx.xxx, replacing xxx.xxx.xxx.xxx with the ip address of the Drobo, and save the file./Library/Application Support/CrashPlan/.ui_info on OSXC:\ProgramData\CrashPlan\.ui_info on Windows$HOME/.crashplan/.ui_info on Linux4243,drobo. You can preserve the original .ui_info file somewhere else, and restore it once you are done accessing CrashPlan on the Drobo.Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
Don’t forget to secure access to your Crashplan installation by enabling password access in “Settings” > “Security” > “Require account password to access CrashPlan desktop application”
Size: 25 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, follow these steps:
~/Library/Application Support/CrashPlan/ui.properties on OSXC:\Program Files\CrashPlan\conf\ui.properties on Windows/usr/local/crashplan/conf/ui.properties on LinuxserviceHost=xxx.xxx.xxx.xxx, replacing xxx.xxx.xxx.xxx with the ip address of the Drobo.Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
Don’t forget to secure access to your Crashplan installation by enabling password access in “Settings” > “Security” > “Require account password to access CrashPlan desktop application”
Size: 23 MB
This DroboApps depends on the locale and java8 DroboApps. Please make sure they are installed or Crashplan will not start..
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4200:localhost:4243 root@drobo-fs
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4200
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 23 MB
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-fs
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 21 MB
Changelog: This version fixes several problems with service.sh, and reduces the maximum memory assigned to CrashPlan.
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-fs
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 20 MB
To configure the CrashPlan engine you have to install the software on your machine, and redirect the GUI to connect with the Drobo. To do this, you need to establish a port forward from your desktop to the Drobo. Something like this should do the trick:
ssh -L 4201:localhost:4243 root@drobo-fs
Short explanation: this forwards any connection attempts to port 4201 on your machine to port 4243 on the Drobo. Once this is done, you have to tell the CrashPlan client to connect to port 4201 instead of the default (4243). To do this on a Mac, edit the file ~/Library/Application Support/CrashPlan/ui.properties and add this line:
servicePort=4201
Save the file, and start the app. It will ask for the credentials to be used on the Drobo. Once logged in, if the folder selection screen shows the path /mnt/DroboFS/Shares, then congratulations, you have CrashPlan on your Drobo.
More information about configuring a server over SSH can be found here.
Size: 20 MB
If you like the tutorials, or are using any of the apps from this site, please consider becoming a patreon or making a donation to support our efforts and help keeping the site online.
Published with GitHub Pages. Bootstrap theme: Sandstone.
